Sanyo avl-193 User Manual

Page of 33
Preparation 
(continued)
CABLE TV (CATV) CONNECTION
A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm coaxial cable 
to the set, screw the 75-ohm cable to the ANT. Terminal.
Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are 
scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
This  converter/descrambler  is  necessary  for  normal  viewing  of  the  scrambled  channels.  For  more  specific 
instructions  on  installing  cable  TV,  consult  your  cable  TV  company.  One  possible  method  of  utilizing  the 
converter/descrambler  provided  by  your  cable  TV  company  is  explained  below.  Please  note: An  RF  switch 
provided with two inputs (A and B) is required (not supplied).
“A” position on the RF switch (not supplied) : You can view all unscrambled channels by using the TV’s channel 
keys.
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/descrambler 
by using the converter’s channel keys.
Antenna Connection
Note:
Consult  your  Dealer  or  Service  Center  for  the  type  of  splitter,  RF  switch  or  combiner  that  might  be 
required.
Cable TV converter
/Descrambler
(not supplied)
Two-set
signal
splitter
(not
supplied)
Cable TV Line
RF switch (not supplied)
OUT
IN
ANTENNAS
The antenna requirements for good color television reception are more important than those for black & white 
television reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various antenna systems.
1. A 75-ohm system is generally a round cable with F-type connector that can 
easily be attached to a terminal without tools (not supplied).
2. A 300-ohm system is a flat “twin-lead” cable that can be attached to a 75-
ohm terminal through a 300-75-ohm adapter (not supplied).
OUTDOOR ANTENNA CONNECTION
Use one of the following two diagrams if you connect an outdoor 
antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antennas. 
Connect the outdoor antenna cable lead-in to the ANT. terminal on 
the rear of the TV set.
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
A. Combination VHF/UHF Antenna
B.Separate VHF  and/or
UHF Antennas
Antenna cable
75-ohm 
coaxial cable
300-ohm
twin-lead
VHF/UHF 
antenna
VHF/UHF 
antenna
300/75-ohm
adapter
(not supplied)
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm
coaxial cable
OUT              IN
VHF
antenna
UHF
antenna
Combiner
(not supplied)
or
or
6
RF