SMART Technologies board d600 User Manual

CHAPTER 2 – INSTALLING AND SECURING YOUR SMART BOARD 
INTERACTIVE WHITEBOARD

Environmental Requirements

Before installing your interactive whiteboard, review the following environmental 
requirements.

Operating temperature 41°F to 95°F (5°C to 35°C)

Storage temperature

-40°F to 120°F (-40°C to 50°C)

Humidity

• 5% to 80% relative humidity, non-condensing

• Humidity above 80% can cause slight wrinkling 

in the screen surface sheet. The wrinkles disappear 
when the humidity lowers.

Water and fluid 
resistance

• Intended for indoor use only. Doesn’t meet any 

salt-spray or water ingress requirements.

• Don’t pour or spray liquids directly onto your interactive 

whiteboard or any of its sub-components. These liquids 
can get into areas where they could damage sensitive 
electronic components. See Keeping the Writing Surface 
Clean on page 33 for detailed instructions on cleaning 
your interactive whiteboard.

Dust

• Moderate dust. Intended for use in office and classroom 

environments. Not for industrial use where heavy dust 
and pollutants can cause malfunctions or impaired 
operation.

• Designed for pollution degree 1 (P1) as per EN61558-1, 

which is defined as “No pollution or only dry 
non-conductive pollution.”

Electrostatic discharge 
(ESD)

• Designed to withstand electrostatic shock

• EN61000-4-2 severity level 4 for direct and indirect ESD

• No malfunction or damage up to 15kV (both polarities) 

with a 330 ohm, 150 pF probe (air discharge)

• Unmated connectors meet no malfunction or damage up 

to 8kV for direct (contact) discharge

Conducted and 
radiated emissions

EN55022/CISPR 22, Class B