SMART Technologies board d600 User Manual

Page of 68
Important 
Information
Before you install and use your SMART Board™ 600 or D600 series interactive 
whiteboard, read and understand the safety warnings and precautions in this 
installation and user’s guide. These safety warnings and precautions describe the 
safe and correct operation of your SMART Board interactive whiteboard and its 
accessories, helping you to prevent injuries and equipment damage.
NOTE
In this document, the term “interactive whiteboard” refers to your interactive 
whiteboard and its accessories and options.
Safety Warnings and Cautions
WARNINGS
Failure to follow the installation instructions included with your interactive 
whiteboard, or found in this guide, could result in personal injury or product 
damage.
Read the safety warnings, precautions and other important information 
published by your projector’s manufacturer. Do not stare (or allow children 
to stare) directly into your projector’s beam of light. Do not touch (or allow 
children to touch) your projector because it can become extremely hot during 
normal operation.
Two people are required to safely mount your interactive whiteboard on a wall 
or floor stand because it might be too heavy for one person to safely 
maneuver alone. When you lift your interactive whiteboard, you and your 
assistant should stand on either side of the screen, supporting its weight 
at the bottom corners while balancing the top with your other hands.
Do not leave cables on the floor where they can be a tripping hazard. If you 
must run a cable over the floor, lay it in a flat, straight line and secure it to the 
floor with tape or a cable management strip of a contrasting color. Handle 
cables carefully and avoid excessive bending.