Star Micronics SP2000 User Manual

– 151 –

APPENDIX

Printing method:

Serial impact dot matrix

Print direction:

Bi-directional

Number of head pins:

9 wires

Number of print columns:

42 columns

Character set:

ASCII

96 (characters)

Extended graphics: 128 

×

 40 pages

(Star mode)
128 

×

 6 pages

(ESC/POS)

International characters: 46 (Star mode)

37 (ESC/POS)

Font configuration

7 (Half dots) 

×

 9 or 5 

×

 9

Printing width:

63 mm, 210 dots

Print speed:

Approx. 3.1 lines per sec.

Line spacing:

1/6-inch (default), n/144-inch (programma-
ble by command)

Paper feed method:

Friction feed

Paper feed speed:

Approx. 3.5 inches/sec.

Paper specifications

Paper type:

Ordinary bond and carbonless copy paper

Paper width:

76

±

0.5 mm (3.0 inches)

Roll diameter:

85mm (3.35 inches) max.

Internal diameter of roll:

12

±

1 mm

Note: The paper must not be glued to the core.

Thickness

SP2300

(single) 0.07 mm to 0.10 mm
(copies) Original + 2 copies (Max. 0.2 mm)

SP2500

(single only) 0.07 mm to 0.10 mm

Note: The auto-cutter that is fitted to the SP2500 series

is designed to cut single ply paper to a maximum
thickness of 0.1mm.  Cutting multi-ply paper, or
paper thicker than 0.1mm is not recommended as
the specifications of the auto-cutter cannot be
guaranteed.