Tascam DA-78HR User Manual
1 - Introduction to the DA-78HR
10
TASCAM DA-78HR
There are two basic types of Hi8 tape: MP and ME.
Each has its own particular characteristics and mer-
its:
Each has its own particular characteristics and mer-
its:
• MP tapes are manufactured using a daubed mag-
netic particle deposit process and exhibit a level of
performance which is more than acceptable. They
have a durability which allows them to be used as
work tapes in studio and post-production
environments.
performance which is more than acceptable. They
have a durability which allows them to be used as
work tapes in studio and post-production
environments.
• ME tapes have their magnetic layer produced
through a metal evaporation process. Generally
speaking, though these tapes have a high perfor-
mance level, they are not as robust as MP tapes (see
above) and should be used for live recording and
archival purposes, rather than as work tapes.
speaking, though these tapes have a high perfor-
mance level, they are not as robust as MP tapes (see
above) and should be used for live recording and
archival purposes, rather than as work tapes.
TASCAM does not endorse any specific tape or tape
manufacturer. TASCAM has licensed the use of the
DTRS logo (
manufacturer. TASCAM has licensed the use of the
DTRS logo (
) to tape manufacturers, provided
their tape meets the specifications required by DTRS
tape recorders. The table below lists several such
tapes, certified for use with DTRS tape recorders.
However, the use of the DTRS logo on the tape pack-
aging does not imply any endorsement of the tape by
TASCAM. It is possible that the characteristics and
sensitivities of tapes may be changed by the manu-
facturers without notice. The brands and model num-
bers of tapes listed below may not always meet the
specifications required by DTRS systems for opti-
mum performance. TASCAM assumes no responsi-
bility for problems resulting from changes made by a
manufacturer to the materials or specifications of its
tape products.
tape recorders. The table below lists several such
tapes, certified for use with DTRS tape recorders.
However, the use of the DTRS logo on the tape pack-
aging does not imply any endorsement of the tape by
TASCAM. It is possible that the characteristics and
sensitivities of tapes may be changed by the manu-
facturers without notice. The brands and model num-
bers of tapes listed below may not always meet the
specifications required by DTRS systems for opti-
mum performance. TASCAM assumes no responsi-
bility for problems resulting from changes made by a
manufacturer to the materials or specifications of its
tape products.
The electrical characteristics of DTRS recorders are
adjusted and set using Sony Hi8 tape parameters (MP
and ME) prior to shipment.
adjusted and set using Sony Hi8 tape parameters (MP
and ME) prior to shipment.
1.5.1 Tape brands
The following brands and models of tape can be used
with the DA-78HR. As mentioned above, this list
does not constitute any endorsement by TASCAM of
these products, nor is it a guarantee that tapes bearing
with the DA-78HR. As mentioned above, this list
does not constitute any endorsement by TASCAM of
these products, nor is it a guarantee that tapes bearing
this brand and model name will continue to give opti-
mum performance.
mum performance.
The electronics of DTRS recorders are designed to
operate within specific parameters. The use of a tape
with sensitivity higher or lower than that of tapes for
which the DTRS recorder was originally designed
may cause an error in functionality or prevent the
user from getting optimum performance from the
tape. Always use the shortest possible tape for a
given project. Do not attempt to use 150-minute or
longer tapes in DTRS machines, as the machine will
detect the thickness of tape and automatically eject
any tape thinner than recommended.
operate within specific parameters. The use of a tape
with sensitivity higher or lower than that of tapes for
which the DTRS recorder was originally designed
may cause an error in functionality or prevent the
user from getting optimum performance from the
tape. Always use the shortest possible tape for a
given project. Do not attempt to use 150-minute or
longer tapes in DTRS machines, as the machine will
detect the thickness of tape and automatically eject
any tape thinner than recommended.
Never attempt to use a tape with the DA-78HR that
has previously been used in video equipment.
has previously been used in video equipment.
NOTE
— I MP OR TANT
You cannot cut and splice DTRS 8mm tapes for edit-
ing purposes. Using a spliced tape in the DA-78HR
will invariably result in serious damage to the heads,
requiring replacement. All editing must be done digi-
tally.
ing purposes. Using a spliced tape in the DA-78HR
will invariably result in serious damage to the heads,
requiring replacement. All editing must be done digi-
tally.
Maker
MP
ME
Sony DARS-MP
E6-HME
P6-HMP E5-HME
P6-HMPX E6-HMEAD
P5-HMP E5-HMEAD
P5-HMPX
E6-HMEX
E5-HMEX
Quantegy DA8 MP
BASF DA
MP
HHB DA113
Maxell DRS-113DA
(P)
Fuji DPD-MP