Epson 386-25 User Manual

Follow these steps to change your built-in serial and parallel

interface settings:

1. 

At the main menu, highlight 

Serial/Parallel.The

current settings for each port appear:

Serial

Primary

Parallel

Primary

2.

Press 

Enter 

to move the cursor block into the submenu. You

see this additional option menu:

Disabled

Primary

Secondary

3.

If you want to change the serial port setting, be sure

Serial

is highlighted and press 

Enter. 

If you want to

change the parallel port setting, highlight p a r a 1 1 e 1
and press 

Enter. 

The cursor block moves into the submenu.

4.

Use   or   to highlight the appropriate setting for the port

you selected and press 

Enter. 

The screen displays the new

setting.

Note

If you add an option card 

with a parallel or serial port and

highlight 

a setting that causes a conflict between your

built-in port and the port on the option card, you see- this

message:

Conflict 

with option card

Highlight a setting that is appropriate for your system

configuration and press Enter.