Shure M267 User Manual
GENERAL
The Shure Model M267 is a microphone mixer-remote
amplifier specifically designed for professional applications.
The excellent performance, versatility and features of this
complete, compact console make it an ideal choice for stu-
dio, remote, or sound reinforcement use, and as an add-on
mixer for expanding existing facilities. It is also ideally suited
for use with audio and video tape recorders to provide multi-
ple microphone inputs.
The excellent performance, versatility and features of this
complete, compact console make it an ideal choice for stu-
dio, remote, or sound reinforcement use, and as an add-on
mixer for expanding existing facilities. It is also ideally suited
for use with audio and video tape recorders to provide multi-
ple microphone inputs.
Features:
S
Wide, flat frequency response and extremely low dis-
tortion up to +18 dBm output
tortion up to +18 dBm output
S
Extremely low noise and RF susceptibility
S
Four switchable microphone- or line-level balanced-line
inputs with individual gain controls and low-frequency
rolloff switches. MUMETAL shielding on input transform-
ers
inputs with individual gain controls and low-frequency
rolloff switches. MUMETAL shielding on input transform-
ers
S
Feedback-type input gain controls for maximum clip-
ping levels and dynamic range
ping levels and dynamic range
S
Output switchable for line or microphone level
S
Built-in switchable peak limiter cuts output overload
distortion, adapts to power supply voltage
distortion, adapts to power supply voltage
S
LED indicator shows limiter operation or overload with
limiter defeated
limiter defeated
S
Externally adjustable limiter threshold (–4 to +18 dBm)
S
VU meter calibrated for +4 and +8 dBm with range
switch. Illuminated with ac operation
switch. Illuminated with ac operation
S
Ac or built-in battery operation. Noiseless automatic
switchover to battery in case of ac line failure. Battery
test without program interruption
switchover to battery in case of ac line failure. Battery
test without program interruption
S
Front-panel headphone level control and monitor jack
drives almost any stereo or mono headphones; output
can be additional unbalanced line feed to drive a tape
recorder or power amplifier
drives almost any stereo or mono headphones; output
can be additional unbalanced line feed to drive a tape
recorder or power amplifier
S
Direct mix bus for stacking units
S
Automatic muting prevents speaker damage during
turn-on and -off
turn-on and -off
S
Low distortion, high-stability tone oscillator for line test
and level checks
and level checks
S
All connections phased. Line output terminals phase-
indicated
indicated
S
Compact and lightweight, with rugged, abrasion-resis-
tant case
tant case
S
Internally selectable 120 or 240 Vac, 50/60 Hz opera-
tion
tion
S
Underwriters’ Laboratories Listed and Canadian Stan-
dards Association listed as Certified
dards Association listed as Certified
SPECIFICATIONS
Frequency Response
30 Hz to 20,000 Hz,
±
2 dB
Voltage Gain (at 1,000 Hz)
(Outputs terminated: line 600
W,
microphone 150
W,
mix
bus 3.3 k
W,
headphone
200
W
, tip-sleeve and ring-
sleeve )
Inp t
OUTPUT
Input
Line
Microphone
Mix
Bus
Low-Impedance
Microphone (150
Microphone (150
Ω
)
91 dB
41 dB
24 dB
Line
40 dB
–9 dB
–27 dB
Mix Bus
55 dB
5 dB
– –
Inputs
IMPEDANCE
Input
Designed
for Use
With
Actual
(Internal)
Input
Clipping Level
Microphone
19 to
600
Ω
1
k
Ω
–32 dBV to
–5 dBV
∗
(25 mV to 0.56 V)
Line
Less
than10 k
Ω
66 k
Ω
+20 dBV
Mix Bus
3.5 k
Ω
3.5 k
Ω
+7 dBV (2.2 V)
∗
Depending on input control setting
Shure Brothers Incorporated
222 Hartrey Avenue
Evanston IL 60202-3696 U.S.A.
222 Hartrey Avenue
Evanston IL 60202-3696 U.S.A.
Model M267 User Guide
27A8376 (SE)
E
1999, Shure Brothers Incorporated
Printed in U.S.A.