Epson equity y14499113001 User Manual
![Epson](https://files.manualsbrain.com/attachments/a47e008ef11c984ab8b71f0fc83873b5a963bd98/common/fit/150/50/31cec7b3b2e304c684d8acb1063f7a8423171db6df8832d86330b0432118/brand_logo.png)
Note: This test destroys all data on the innermost cylinder of the selected
hard disk drive. This cylinder is reserved for diagnostics, and is never
used for storage by MS-DOS. Therefore, data created by MS-DOS
is not destroyed.
Select option 2 from the menu to start this test. You see these messages:
The data on the highest physical cylinder may be
destroyed by this check.
Enter
Y to start this check.
Enter N to return to the menu.
Press Y and then
Enter
to continue with the test.
You do not see a cylinder count during the test. If no errors occur, the
program returns to the menu.
If an error is reported, make a note of the code and message. Then use
the Non-destructive surface analysis (option 4 on the HARD DISK
FORMAT MENU) to check the condition of the hard disk. If this analysis
FORMAT MENU) to check the condition of the hard disk. If this analysis
shows no other problems with the disk, follow these steps:
1. Back up all the files on your hard disk.
2. Re-format the disk using option 2, Format hard disk, on the
OPERATION MENU.
3. Re-create the MS-DOS partition with FDISK and format it with
SELECT. (See your MS-DOS manual.)
4. Restore your files.
Error detection and correction check
This test checks the ability of the hard disk drive to detect a read/write
error and to correct the data accordingly.
Note:
This test destroys some data on the innermost cylinder of the
selected hard disk drive. This cylinder is reserved for diagnostics,
and is never used for storage by MS-DOS. Therefore, data created
by MS-DOS is not destroyed.
Select option 3 from the menu to start this test. You see these messages:
The data on the highest physical cylinder may be
destroyed by this check.
-Enter Y to start this check.
Enter N to return to the menu.
5-26