SMSC LAN9311 User Manual
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
SMSC LAN9311/LAN9311i
267
Revision 1.4 (08-19-08)
DATASHEET
14.2.9.5
General Purpose Timer Configuration Register (GPT_CFG)
This read/write register configures the LAN9311/LAN9311i General Purpose Timer (GPT). The GPT
can be configured to generate host interrupts at the interval defined in this register. The current value
of the GPT can be monitored via the
can be configured to generate host interrupts at the interval defined in this register. The current value
of the GPT can be monitored via the
. Refer to
for additional information.
Offset:
08Ch
Size:
32 bits
BITS
DESCRIPTION
TYPE
DEFAULT
31:30
RESERVED
RO
-
29
General Purpose Timer Enable (TIMER_EN)
This bit enables the GPT. When set, the GPT enters the run state. When
cleared, the GPT is halted. On the 1 to 0 transition of this bit, the
GPT_LOAD field of this register will be preset to FFFFh.
This bit enables the GPT. When set, the GPT enters the run state. When
cleared, the GPT is halted. On the 1 to 0 transition of this bit, the
GPT_LOAD field of this register will be preset to FFFFh.
0: GPT Disabled
1: GPT Enabled
1: GPT Enabled
R/W
0b
28:16
RESERVED
RO
-
15:0
General Purpose TImer Pre-Load (GPT_LOAD)
This value is pre-loaded into the GPT. This is the starting value of the GPT.
The timer will begin decrementing from this value when enabled.
This value is pre-loaded into the GPT. This is the starting value of the GPT.
The timer will begin decrementing from this value when enabled.
R/W
FFFFh