Sub-Zero proliner install guide User Manual

R E Q U I R E M E N T S

IMPORTANT NOTE: This installation must be
completed by a qualified installer or Wolf
authorized service center technician.

Installer: Please read the entire Installation
Instructions prior to installation. Save these
instructions for the local inspector’s refer-
ence, then leave them with the homeowner.

Homeowner: Please read and keep these
instructions for future reference and be sure
to read the entire Use & Care Information
prior to use.

Any questions or problems about the
installation should be directed to your Wolf
dealer or Wolf Appliance Company, Inc. at
800-332-9513. You can also visit our website
at wolfappliance.com.

IMPORTANT NOTE: This appliance must be
installed in accordance with National Electrical
Codes, as well as all state, municipal and local
codes. The correct voltage, frequency and
amperage must be supplied to the appliance
from a dedicated, grounded circuit which is
protected by a properly sized circuit breaker or
time delay fuse. The proper voltage, frequency,
and amperage ratings are listed on the product
rating plate.

Record the model and serial numbers before
installing the Pro ventilation hood liner. Both
numbers are listed on the rating plate, located
on the left wall of the hood liner shell.

W O L F   P R O  V E N T I L A T I O N  

L I S T   O F   M A T E R I A L S

The following is a list of materials shipped
with the Wolf Pro ventilation hood liner.

Stainless steel hood liner

Transition with backdraft damper (attached
inside hood liner—needs to be removed)

(2) Control knobs

Filters (installed in hood liner)

Grease cups (installed in hood liner—
Model L282212I only)

(10) #10 x 2" (51) self-tapping hex head
screws

(10) 10-24 washer nuts

Installation package (taped to filters)

Installation Instructions

Use & Care Information and product
registration card