Siemens SE105 User Manual
26
Configuring the local network
Gigaset Router / de / A31008-E105-B100-2-19 / configure_tcpip.fm / 05.06.2003
Synchronising the TCP/IP settings with the Gigaset Router
You have now configured your PC so that it is ready to be connected to the Gigaset
Router. You now have to release the old TCP/IP settings and update them with the
settings of your Gigaset Router.
◆
Click on Start – Run.
◆
Enter WINIPCFG and click on OK.
There may be a slight delay before the IP configuration appears.
◆
Select your network adapter from the selection list.
◆
Click on Release and then Renew.
If the router's default IP address (192.168.2.1) was not changed, the IP address
If the router's default IP address (192.168.2.1) was not changed, the IP address
should now read 192.168.2.x (with x being a number between 2 and 254). The
Subnet mask must always be 255.255.255.0 and the Default Gateway must have
the router's IP address (192.168. 2.1). These values confirm that your Gigaset Router
is working.
◆
Click on OK to close the IP configuration window.