Epson DFX-5000+ User Manual
Caution:
Be sure to remove all protective materials before you turn
on the printer.
Do not try to remove the elastic cord from the front or rear
tractors. It is not a protective material.
Choosing a Place for the Printer
When you select a location for your printer, keep the following
in mind:
Place the printer on a flat, stable surface.
Place the printer close enough to the computer for its cable
to reach.
Leave plenty of room around the printer for your front and
rear stacks of continuous paper as well as your printed
output.
Use a grounded outlet; do not use an adapter plug.
Avoid locations that are subject to direct sunlight, excessive
heat, moisture, or dust.
Avoid using electrical outlets that are controlled by wall
switches or automatic timers. Accidental disruption of
power can wipe out information in both your computer’s
memory and your printer’s memory.
Avoid using outlets on the same circuit with large motors
or other appliances that might disturb the power supply.
Keep the entire computer system away from potential
sources of interference, such as loudspeakers or the base
units of cordless telephones.
1-4
Set Up and Print