Epson DFX-5000+ User Manual

The self test can be run in either draft or near letter quality

(NLQ) mode.

1. While holding down the LF/FF button (for draft mode) or

TEAR OFF button (for NLQ mode), turn on the printer.

After printing starts, release the button.

The printer prints a series of characters. Here is part of a

typical self test printout in high-speed draft.

2. The self test continues until the paper runs out or until you

press the PA USE button. If the test results are satisfactory

and you wish to stop the test, press the PAUSE button. (To

resume the test, press the PAUSE button again.)

3. To end the self test, press the PA USE button to stop printing

and then hold down the LF/FF button to advance the paper.