Alliance Laundry Systems 504523R3 User Manual
504523
33
STEP 5:
Start Dryer
METERED MODELS:
Place coin(s) in slide and carefully push in as far as
possible and then pull slide out as far as possible. After
IN USE light comes on (indicating start of cycle), press
the PUSH-TO-START button.
possible and then pull slide out as far as possible. After
IN USE light comes on (indicating start of cycle), press
the PUSH-TO-START button.
NONMETERED MODELS:
Rotate timer knob to desired time setting (up to 60
minutes). After IN USE light comes on (indicating start
of cycle), press the PUSH-TO-START button.
minutes). After IN USE light comes on (indicating start
of cycle), press the PUSH-TO-START button.
Remove knits when slightly damp because overdrying
may cause shrinkage. Do not tumble dry knit woolens.
may cause shrinkage. Do not tumble dry knit woolens.
Should dryer stop before cycle is completed, the motor
overload protector may have cycled. See page 28.
overload protector may have cycled. See page 28.
W297IE0A
Metered Models
D365IE1A
Nonmetered Models