Seagate barracuda 4lp st32171n-w-wc-wd-dc User Manual
Barracuda 4LP Installation Guide, Rev. B
45
WC/DC drives
WC/DC drives section
Setting the SCSI ID jumpers
The SCSI ID for “WC” and “DC” model drives is normally set
over the SCSI bus by the host system using connector contacts
39 (ID0), 40 (ID2), 79 (ID1), and 80 (ID3). Users need not install
jumpers to select SCSI ID.
over the SCSI bus by the host system using connector contacts
39 (ID0), 40 (ID2), 79 (ID1), and 80 (ID3). Users need not install
jumpers to select SCSI ID.
Terminating the drive
“WC” and “DC” model drives do not have internal terminators or
any other way of adding internal termination to the drive. Exter-
nal termination for these drives is normally supplied by the host
equipment when termination is required.
any other way of adding internal termination to the drive. Exter-
nal termination for these drives is normally supplied by the host
equipment when termination is required.