Epson EB-G5650W User Manual

The   Split  Screen  Setup  will  also  be  displayed  when  the  [Source
Search]  button  is  pressed  on  the  remote  control  or  control  panel  or
when  a  Source  button  is  pressed  on  the  remote  control.

To  switch  the  image  projected  on  the  left  screen,  select  "Source
Left"  and  press  the  [Enter]  button.  To  switch  the  image
projected  on  right  screen,  select  "Source  Right"  and  press  the
[Enter]  button.

Select the input source to project and press the [Enter] button.

Only the input sources that can be combined can be selected.

"Input Sources for Split Screen Projection"

p.34

To switch the projected image during split screen projection, start the
procedure from step 2.

• The audio from the input source that is selected for the left screen

will be output.

• If Computer1, Computer2, or BNC is selected for the left screen,

the image for the left screen can be displayed on an external
monitor. (This is possible only when RGB signals are input.)
s

p.139

Switching the left and right screens

Use the following procedure to switch the images displayed on the left and
right screens.

Procedure

Press the [Menu] button on the remote control or the control
panel during split screen projection.

Select "Swap Screens" and then press the [Enter] button.

The images on the left and right screens will be swapped.

Switching the left and right image sizes

Procedure

Press the [Menu] button on the remote control or the control
panel during split screen projection.

Select "Screen Size" and then press the [Enter] button.

Select the image size to display and then press the [Enter]
button.

Press the [Menu] button to end the setting procedure.

Projecting Two Images Simultaneously (Split Screen) (EB-G5950/G5900/G5650W/G5600 only)