Sirius Satellite Radio stiletto 10 User Manual

This Menu option is designed to restore all the
original factory settings. To activate the Factory
Default perform the following procedure while
in the “Menu Options” List mode:

1.  Use the CHANNEL Button to highlight the

“Factory Default” option. Press the SELECT
Button to select. “Restore  Settings” will pop
up on the CRSR-10’s display (below right).

1. To remove the faceplate, hold both sides of the
    CRSR-10 with one hand. Locate the indented tab
    on the bottom of the CRSR-10. Pull on the
    indented tab of the faceplate with the finger of
    your other hand and apply gentle pressure.  The
    faceplate should snap off easily.

2. To add a faceplate, hold both sides of the CRSR-
   10 with one hand.  Pick up a faceplate with your
   other hand and place into position while making
   sure the indented tab remains on the bottom of
    the unit.  Once lined up, the faceplate should
   snap on easily with gentle pressure on all four
    corners.

       Note: If “Yes” is chosen, the unit reverts to the

original factory settings for the following
parameters:

All Presets revert to empty
Display Brightness to 100%
Display Contrast to 60%
FM Transmitter to “On”
Audio Output Level to 50%
Memory Search On
Memory locations will be erased
12 Hour Clock Format
Eastern time zone
Daylight savings time observed
Program Alert Time OFF
Program Alert Day Monday
Program Alert Channel Number (current )
Auto Shutdown Off
Sleep Mode Off

2.  Use the CHANNEL Button to highlight “Yes” to

restore all the settings or select “No” to return to
the Menu Options List Mode.