Epson 10020 User Manual

Note

If your application program requires a monitor that

supports graphics but you have a monochrome monitor,

the results will be unpredictable.

7. If you are still having difficulty with your monitor, try

running either the Monochrome Display Adapter and CRT

Check or the Color Graphics Display Adapter and CRT

Check, both of which are described in Appendix D of this

manual. If the diagnostics program indicates an error,

contact the place where you bought the monitor. If you are

using an Apex monitor, call your Epson Customer Care

Center for assistance.

If you have trouble accessing data on a diskette, try the

following steps:

1.

Is the diskette inserted properly? You may have inserted it
upside-down or it may not be inserted all the way. Remove
the diskette from the diskette drive and reinsert it with the

label facing up and the read/write slot leading into the

drive. (See Chapter 2 for detailed instructions on inserting

and removing diskettes.)

2.

If reinserting the diskette does not solve the problem and
you have access to another diskette drive of the same type,

place the diskette in the other drive and repeat the

operation. If you can successfully repeat the operation in

the new drive, the trouble may be in your diskette drive.
See the section below on “Diskette Drive Problems.”

3.

If the problem persists in the new diskette drive, make sure

the diskette is the correct type for your drive. The 360KB

drive in your computer uses 5 1/4-inch double-sided,
double-density diskettes. You cannot use diskettes

formatted for 1.2MB in this drive.