Sylvania st88244 User Manual

7

Your ST88244 phone has 10 memory
locations for storing important telephone
numbers.

1. Remove the

handset from the
base and press
MEM. The
TALK/BATT LOW
LED flashes.

2. Enter the phone number you want to

store (up to 20 digits).

3. Press MEM and enter a number (0-9) on

the keypad for the memory location or
SPEED DIAL you want to use.

You hear a long beep and the
TALK/BATT LOW LED goes out
indicating the number has been 
stored successfully.

If you enter a number in a location 
that has a previously stored number, 
it will overwrite the existing number
without warning.

The pause feature is useful for long
distance calling, credit card dialing, 
or sequences that require a pause 
between digits.

To use this function, press PAUSE/REDIAL
on the handset in the phone number
sequence at steps
1 and 2 in “Storing
a Number in
Memory”.

Follow step 3 in the “Storing a Number in
Memory” section to complete the operation.

If your phone is set up for pulse dialing, 
you can store a mixed mode number 
(up to 20 digits) to easily access long
distance services.

1. Remove the handset from the base 

and press MEM. The TALK/BATT LOW
LED flashes.

2. Enter the number to be dialed in 

pulse mode.

3. Press the

*

/TONE button

on the handset.
The 

*

button counts as
one digit and
enters a pause.

4. Enter the number(s) to be dialed in 

tone mode.

5. Press MEM and a number (0-9) on the

keypad for the memory location you wish
to use. You hear a long beep and the
TALK/BATT LOW LED goes out.

To dial a phone number stored in memory, 
press TALK, then press MEM and the
memory location (0-9). Your phone will dial
the stored number.

UP043DH (ST88244) resize  3/3/04  5:24 PM  Page 7