Shindaiwa T10812001001 User Manual

6

The terms “left”, “left-hand”, and “LH”; 

“right”, “right-hand”, and “RH”; “front” and 

“rear” refer to directions as viewed by the 

operator during normal  operation. 

 waRninG!
Do not make unauthorized 

modifications or alterations to your 

unit or its components.

Before assembling, make sure you have all the components required for a 

complete unit:

Outer Tube/Mainshaft Assembly

 

■

Tiller/Cultivator Tool Assembly

 

■

Kit containing hardware, owner/operator's manual, and a 5 mm hex key.

 

■

Carefully inspect all components for damage.

Tine installation directly affects the Til-

ler/Cultivator Tool’s ability to break new 

ground.  Using the illustrations as a 

guide, determine the correct tine ori-

entation for the tilling/cultivating job at 

hand:

Install the tine assemblies to the 

1. 

gearcase output shafts.
Secure each tine assembly with 

2. 

one clevis pin and one hitch pin as 

shown.

waRninG!
Always switch the engine 

OFF before working on the gear-

case or tines!

MCLT23006

MCLT23007