Tascam MMR-8 User Manual

Page of 6
SCSI Tips for MMR/MMP Users
rev 1.0         1/26/99
6
Certified Drives
The following disk drives have been approved for use with the MMR/MMP:
Drive Manufacturer
Model
Firmware Version
IBM
DCHS09F
2222
Nikon*
DD53-SIP Beluga AV
Unknown
Seagate
ST19101W
0014
Seagate
ST32171N
0280
Seagate
ST32272N
0876
Seagate
ST34572N
Unknown
Seagate
ST34573N
5958
Seagate
ST34573W
5764
Seagate
ST39102LW
0005
Seagate
ST39173N
5764
Seagate
ST39173W
5764
Manufacturers frequently release new drive models and obsolete other drive models. The
most current list of approved drives can be found on the TASCAM web site at
http://www.tascam.com .
* Users should be aware these drives do not perform as well as hard drives. Test results with the NIKON
Beluga drive with 1K/sector media show 8 tracks of record and playback in 16- or 24-bit TapeMode is
generally reliable. Non-destructive mode performance is less reliable, especially with heavy edit density.
DVD RAM Support
The MMR/MMP will support SCSI backup and export to DVD RAM disks as of
software version 3.1, scheduled for release in February 1999. Testing so far indicates that
these drives are several times slower than Magneto-Optical disks for recording and
transfers. Playback of a limited number of tracks is possible from a DVD RAM disk, but
maximum performance seen to date is 6 channels of 16-bit material in TapeMode.
TASCAM
TEAC Professional Division
SCSI Tips for MMR/MMP Users
73470 Rev B