Aleratec 350124 User Manual

www.aleratec.com

13

Main Menu
Copy HDD

The “Copy HDD” function performs an actual copy from a source HDD to one or 

more target HDDs. The target HDDs must be at least as large as the source. The 

1:11 HDD Copy Cruiser IDE/SATA will copy every block of capacity on the source 

HDD. 

1.  Load the source HDD and the target HDDs into the 1:11 HDD Copy Cruiser 

IDE/SATA. The system will auto-detect the hard drives. After the drives have 

been detected, a screen similar to the one below will be displayed. 

Note: Before copying be sure that the capacity of the target HDD is 

equal to or larger than the source hard drive. 

2.  Press ENT to start copying. The system will auto-detect the hard drives. The 

following information will be displayed. 

3.  During the copy process the 1:11 HDD Copy Cruiser IDE/SATA will display 

progress information.

The amount of data remaining to be transferred (shown in gigabytes), and time 

will be displayed as the percentage of completion increases. 

Note: The copying speed, capacity and duration may vary from one 

source hard drive to another. 











