Swann PPW-250 User Manual

1. Test the camera signal before permanently installing the cameras.
2. Using battery power is only recommended for testing purposes as the cameras do require constant power to operate.
3. IR or night vision will reflect off of glass or windows and overexpose the picture.  Try placing cameras in direct line of 
    sight of your subject.
4. Never aim the camera directly at the sun as this can permanently damage the lens.
5. Never submerge the camera in water.  Some shelter is recommended such as an awning or eave.

Wireless Internet

Cordless Phones/Mobiles

Some Electronic Devices

If possible turn off or keep
the camera and receiver
away from wireless devices

Some wireless devices can 
be set to different frequencies.
Consult the manufacturer’s
manual for details

A clear line of sight with little wireless interference 
       will always give you the strongest picture

Cable for wireless connections only

To Power Supply

To DVR/Monitor

To Power Supply

Cable for wired connection

Walls and floors can also limit range and image results.  Place the receiver in a location that
                                    is relatively close to the camera’s position

Note:  Wireless and electronic devices such as these can interfere with camera
 

transmission if they are within the cameras range.

Cable for wired connection

www.swannsecurity.com

Swann Communications • Toll Free Technical Support: USA - 1-800-627-2799, 1-877-274-3695, Australia - 1300 13 8324 • Email: tech@swannsecurity.com

.com