Sharp LC-32DV22U User Manual

Some discs are specified as not suitable for children. 

Playback of such discs can be restricted with this 

TV/DVD.

Press SETUP and the SETUP screen 

displays.

Press ϳ/ϴ to select 

 (SETUP), then 

press ϵ/϶ or ENTER.

Press ϳ/ϴ to select “Parental”, then press ϶

or ENTER.

“Enter Password” screen will appear.

Press “0000” using Number buttons (0–9).

(Please note, this is pre-setting password of 

this unit). Then press ENTER. The parental 

level list will appear.

•  If you input a wrong number, press CANCEL.

The parental control setting does not 

function.

Virtually all DVD software can be played 

back.

DVD software for adults cannot be 

played back.

•  Select from level 1 to level 8. The limitation will be more 

severe as the level number decreases.

Press ϳ/ϴ to select from the level 1 to level 

8. The limitation will be more severe as the 

level number is lower. Then press ENTER.

Press SETUP to return to the normal screen.

After the rating is locked, the setting cannot be 

changed unless you enter the correct password.

•  The password is required every time when you change 

the parental level.

•  Depending on the discs, the TV/DVD may not be able to 

limit playback.

•  Some discs may not be encoded with specific rating level 

information though its disc jacket says “adult.” For those 

discs, the parental control feature will not work.

Press SETUP and the SETUP screen 

displays.

Press ϳ/ϴ to select 

 (SETUP), then press 

ϵ/϶ or ENTER.

Press ϳ/ϴ to select “Password”, then press 
϶ or ENTER.
“Enter Current Password” screen will 

appear.
Press Number buttons (0-9) to enter the 

password you have stored.

• If you input a wrong number, press CANCEL.

Then press ENTER. “Enter New Password” 

screen will appear. Press Number buttons 

(0–9) to input the new password.

Press ENTER. Now your new password has 

been set. Be sure to remember this number!

1. Press  EJECT to remove the disc. 

2. While  holding  7 down on the remote control and at the 

same time press STOP on the front panel. “Password 

Clear” appears on the screen. Now the password has 

been returned to the initial value (“0000”).