Epson PowerLite 1730W User Manual

6. Hold the lamp as shown and pull it straight out.

 

7. Gently insert the new lamp. (If it doesn’t fit easily, make sure it is 

facing the right way.) 

8. Push down the side marked 

PUSH

 until it snaps in. 

9. Once the lamp is fully inserted, tighten its screws. 

10. Replace the lamp cover, then tighten its screw. 

11. Slide out the air filter on the bottom of the projector and 

remove it.

12. Slide in the new air filter until it clicks in place.

13. Reset the lamp timer as described in the next section.