Alliance Laundry Systems sf50pv User Manual

5

F232058

To provide personal safety and keep the 
machine in proper working order, follow all 
maintenance and safety procedures presented in 
this manual. If questions regarding safety arise, 
contact the factory immediately.

Use factory-authorized spare parts to avoid 
safety hazards.

To ensure the safety of machine operators, 
the following maintenance checks must be 
performed daily:

1. Prior to operating the machine, verify that 

all warning signs are present and legible. 
Missing or illegible signs must be replaced 
immediately. Make certain that spares 
are available.

2. Check door interlock before starting 

operation of the machine:

a. Attempt to start the machine 

with the door open. The machine should 
not start with the door open.

b. Close the door without locking it and 

attempt to start the machine. The 
machine should not start with the 
door unlocked.

c. Close and lock the door and start a 

cycle. Attempt to open the door while 
the cycle is in progress. The door 
should not open.

If the door lock and interlock are 
not functioning properly, call a 
service technician.

3. Do not attempt to operate the machine if 

any of the following conditions are present:

a. The door does not remain securely 

locked during the entire cycle.

b. Excessively high water level 

is evident.

c. Machine is not connected to a 

properly grounded circuit.

Do not bypass any safety devices in 
the machine.

NEVER insert hands or objects into basket 
until it has completely stopped. Doing so 
could result in serious injury.

SW012

Never operate the machine with a bypassed 
or disconnected out-of-balance switch. 
Operating the machine with severe 
out-of-balance loads could result in personal 
injury and serious equipment damage.

SW010