Sub-Zero qrct36g User Manual

Page of 1
This appliance is certified by Star-K to
meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
Model CT36G
36" Gas Cooktop
The patented dual-stacked burner
design of  Wolf gas cooktops uses its
upper-level burner for maximum heat
transfer. Merely turn down the knob and
the lower-tier burners delivers fine-
tuning control and True Simmer. The
sealed burners and deep recess of the
seamless drawn pan make clean up a
snap. Model CT36G is available in your
choice of classic or platinum stainless
steel finish and natural or LP gas.
Specifications
Overall Dimensions
36" W x 4" H x 21" D 
Burner Rating
(1) 15,000 Btu/hr with 800 Btu/hr delivered 
at simmer
(1) 12,000 Btu/hr with 800 Btu/hr delivered
at simmer
(3) 9,200 Btu/hr with 300 Btu/hr delivered
at simmer
Recommended Cabinet Width
39"
Minimum Height Clearance
4"
Minimum Cabinet Depth
22
3
/
4
"
Countertop Cut-Out
35" W x 19
1
/
4
" D 
Electrical Requirements
120 V AC, 60 Hz
15 amp dedicated circuit
Power Cord
6' cord with grounded plug 
Gas Rating
54,600 Btu/hr
Accessories
Filler strip for installation of multiple
cooktops or modules
One-piece wok grate and single burner
grate
High altitude conversion kit
Accessories are available through your Wolf dealer.
To obtain local dealer information, visit the locator
section of our website, wolfappliance.com.
Product Notes
The 36" gas cooktop with stainless steel 
top construction is available in classic and
platinum finishes.
Natural or LP gas must be specified when
ordering the gas cooktop.
Model Options 
CT36G/S
CT36G/P
CT36G/S-LP
CT36/P-LP
Stainless Steel Finish
Classic
Platinum
Classic
Platinum
Type of Gas
Natural
Natural
LP
LP
Shipping Weight (lbs)
67
67
67
67
Classic
Platinum
Features
Stainless steel top construction, available
in classic and platinum stainless steel
finishes
Five dual-stacked, sealed burners with
automatic reignition on all settings
One large 15,000 Btu/hr sealed burner
with 800 Btu/hr delivered at simmer
One medium 12,000 Btu/hr sealed burner
with 800 Btu/hr delivered at simmer
Three small 9,200 Btu/hr sealed burners
with 300 Btu/hr delivered at simmer
Individual spark ignition system
True Simmer setting on all burners
Illuminated control panel with two-tiered
control knobs
Low-profile cast iron continuous burner
grates with matte porcelain finish
Seamless drawn burner pan
Model CT36G
Dual-Stacked Burners
Full-Flame Setting
Melt Setting
Model CT36G with classic stainless steel finish.