Sub-Zero electricct install guide User Manual

W O L F  

C O N T A C T
I N F O R M A T I O N

Y O U S T A R T

Proper installation is your responsibility.
Have a qualified technician install this
cooktop. You must also assure that electri-
cal installation is adequate and in compli-
ance with all local codes and ordinances.

Installations and repairs must be performed
by a qualified or licensed contractor or
electrician qualified or licensed by the state,
province, or region where this appliance is
being installed.

Make sure you have everything necessary
for correct installation. It is the responsibil-
ity of the installer to comply with the instal-
lation clearances specified on the product
rating plate. The rating plate is located on
the underside of the cooktop.

Electrical ground is required; see Electrical
Requirements on page 13.

Warranty service must be preformed by a
Wolf authorized service center.

R E Q U I R E M E N T S

IMPORTANT NOTE: Save these Installation
Instructions for the local inspector’s use.

Please read the entire Installation Instruc-
tions prior to installation.

This installation must be completed by a
qualified technician.

Installer: please retain these instructions
for local inspector’s reference, then leave
them with the homeowner.

Homeowner: please read and keep these
instructions for future reference and be sure
to read the entire Use & Care Information
prior to use.

IMPORTANT NOTE: This appliance must be
installed in accordance with National Electrical
Codes, as well as all state, municipal and local
codes. The correct voltage, frequency and
amperage must be supplied to the appliance
from a dedicated, grounded circuit which is
protected by a properly sized circuit breaker or
time delay fuse. The proper voltage, frequency,
and amperage ratings are listed on the product
rating plate.

Record the model and serial numbers before
installing the cooktop. Both numbers are on
the rating plate, located on the underside of
the cooktop.