Epson apex 20020, 20040 User Manual

3. Connect the monitor cable to the video card connector on

the back of the computer, as shown below. If the plug has

retaining screws, tighten them securely.

4. If necessary, plug the monitor’s power cord into the

monitor’s power inlet. (The power cord on Apex monitors

is already attached.)

5. Plug the other end of the monitor’s power cord into an

electrical outlet.

Note

If the monitor has the proper type of plug, you can plug

it into the auxiliary AC outlet next to the AC inlet on

the back of the computer.

6. If you connected the monitor to the MGA card in the

computer, set the color/mono monitor switch on the card

(shown in the following illustration) to match the type of
monitor you are using, either color or monochrome.