Adam Equipment cbw 30 User Manual

the level and the scale is supported by all four feet.  

 

•  Attach the power supply cable to the connector on the bottom of 

the scale. Plug in the power supply module.  The power switch is 
located on the base on the right side of the scale. 

 

•  The scale will first display the model number (CBW 30- where 30 

denotes the capacity of the scale in kg), followed by the revision 
numbers (1.2-2.03 where 1.2 is the current hardware revision 
number of the main circuit board and 2.03 is the current software 
revision number). A self-test is followed next. At the end of the 
self-test it will display “ZERO”, if the zero condition has been 
achieved. A stable symbol and “GROSS” indicators are also 
displayed.  

 

 
 

 
 
KEYS 

 

Sets the zero point for all 
subsequent weighing. The 
display shows zero. 

 

 

              or  [Enter] key when 
setting parameters or other 
functions. 

 

It tares the scale and stores the 
current weight in memory as a 
tare value, subtracts the tare 
value from the weight and 
shows the results. This is the 
net weight.  

 

  A secondary function       is 

available to increment the active 
digit when setting a value for 
parameters or other functions. 
 

6