Epson 1000 User Manual

You can load single sheets up to 420 mm (16.5 inches) wide

using the built-in paper feeder or the manual insertion slot.

For the steps on using the paper feeder, see “Loading paper in

the paper feeder” in Chapter 1. Following the tips below will

give you the best performance when loading paper with the

paper feeder.

Load paper into the paper feeder before you turn on the

printer or send data. When the printer receives data from

the computer, it loads a single sheet and begins to print.

Cl If the printer runs out of paper during a print job, reload

the paper feeder and then press the LOAD/EJECT button to

continue printing.

Press the LOAD/EJECT button if you need to eject a sheet

of loaded paper.

You can switch to either manual loading or to the optional

push tractor without removing the paper supply from the

paper feeder. For details, see “Loading paper manually” or

“Switching to continuous paper” later in this chapter.

If the ink does not dry fast enough, try removing sheets

one at a time as they finish printing.

The default page length for paper loaded from the paper

feeder is 61 lines (letter-size paper) or 65 lines (A4-size

paper). You can change it using your software or printer

commands, if necessary. See the Appendix for more about

printer commands.