Epson 1000 User Manual

If the perforation is not aligned with the tear-off edge, adjust

the tear-off position as follows:

1. Make sure the paper is in the tear-off position.

2. While holding down the ALT button, press the

ECONOMY/CONDENSED (up) or FONT (down) button to

adjust the position. The printer remembers the new

position even after you turn it off.

3. Tear off any printed pages.

Note:

The printer has a minimum and maximum tear-offposition. If

you

try

to move the

beyond these limits, the

printer beeps and the paper stops moving.

When the paper reaches the

factory-set

tear-off position, the

printer beeps. Use the factory setting as a reference point when
adjusting the

Removing the push tractor

1. Tear off any printed pages. Press the LOAD/EJECT button to

feed the paper backward out of the printer and into the

paper-park position. Remove the paper from the push

tractor.

Caution:

Never feed labels

To remove labels from the

printer, see “Labels“ later in this chapter.

Make sure you tear offyour printed document before

feeding paper

Reverse feeding several pages at a

time may cause a paper jam.

2. Turn off the printer. Attach the paper separators as shown on

page l-6.

3. Lower the release lever to the single-sheet position.

Paper Handling 2-13