Casio QV-70 User Manual
37
Playing Back Images
Unused pages are colored gray.
Note
• The brightness of the images on a multi-page display may differ
slightly from the brightness when a single image is shown. This is
because the camera automatically uses the brightness setting for
the brightest image contained in the multi-page display for all of the
images.
because the camera automatically uses the brightness setting for
the brightest image contained in the multi-page display for all of the
images.
*
The memory page that is shown on the screen when you
change to the 4-page or 9-page format is in the first (upper
left) position in the multi-page display.
change to the 4-page or 9-page format is in the first (upper
left) position in the multi-page display.
3.
Scroll through the pages on the display.
•
Use [+] (forward) and [–] (back) to scroll through the memory
pages. Pages are scrolled one, four, or nine at a time, de-
pending on the display format you are using.
pages. Pages are scrolled one, four, or nine at a time, de-
pending on the display format you are using.
1
2
3
4
5
6
7
8
9
10
11
【+】
【+】
【−】
【−】
Operation
38
Selecting a Memory Page in a Multi-Page Display
You can use the following procedure to select one of the memory
pages in a multi-page display. Then when you return to the 1-page
display, the memory page you selected will be the one displayed. The
following procedure uses the 4-page display as an example, but you
can use the same procedure with the 9-page display.
pages in a multi-page display. Then when you return to the 1-page
display, the memory page you selected will be the one displayed. The
following procedure uses the 4-page display as an example, but you
can use the same procedure with the 9-page display.
1.
In the Playback Mode, press the MODE button.
•
This changes to the 4-page dis-
play.
play.
2.
Press the DISP button.
•
This causes a white line to appear
under the first (upper left) page.
This white line indicates the
memory page that is currently se-
lected.
under the first (upper left) page.
This white line indicates the
memory page that is currently se-
lected.
•
If you do not perform any opera-
tion for about 10 seconds, the
white line disappears from the dis-
play.
tion for about 10 seconds, the
white line disappears from the dis-
play.
/PROTECT ZOOM
DISP
MODE
+
In this example, we will select this page.
39
Playing Back Images
3.
Move the white line to the memory page that you want to
select.
select.
•
Press [+] to move the line to the
right or [–] to move it to the left. In
this example, press [+] three
times or [–] once.
right or [–] to move it to the left. In
this example, press [+] three
times or [–] once.
4.
Press the ZOOM button.
•
T h e i m a g e i n t h e s e l e c t e d
memory page appears as a 1-
page display.
memory page appears as a 1-
page display.
/PROTECT
ZOOM
DISP
MODE
+
【+】
X 3
Operation
40
Using the Zoom Function
This function lets you select a specific part of a stored image and
enlarge it to twice its normal size.
enlarge it to twice its normal size.
1.
Display an image.
2.
Press the ZOOM button to zoom in on the center of the im-
age.
age.
•
The center of the image is enlarged to twice its normal size.
3.
Change the position of the zoom area.
•
You can use [+] and [–] to change the position of the zoom
area in the sequence shown on page 41.
area in the sequence shown on page 41.
4.
Press the ZOOM button again to return the image to its
original size.
original size.