Sennheiser HME 110 User Manual
14
Adjusting the microphone gain (not HMD 120)
According to JTSO approval C58a, the microphone output voltage is factory-preset to 400 mV/114
dB. If the microphone output voltage is too high or too low for your intercom system, it can be
readjusted on the microphone. To do so, use a small slotted screwdriver and turn the ‘Mic Gain
Adjustment’ screw (see illustration on the left) until you have reached the desired setting.
dB. If the microphone output voltage is too high or too low for your intercom system, it can be
readjusted on the microphone. To do so, use a small slotted screwdriver and turn the ‘Mic Gain
Adjustment’ screw (see illustration on the left) until you have reached the desired setting.
Folding up the headphones
For easy and space-saving transportation, the earcups can be folded up and tucked between the
headband.
headband.
왘
Unfold the headphones by grasping both earcups and pulling them down and away from the
headband.
headband.
Mic Gain Adjustment
Mic Gain Adjustment
Mic Gain Adjustment
Mic Gain Adjustment
Mic Gain Adjustment
Βοοκ_83566_1006_ΣΠ6.βοοκ Σειτε 14 Διενσταγ, 4. Μ ρζ 2008 1:42 13