Think Outside Travel Mouse (for iPAQ 1945) User Manual

 
When the Stowaway Travel Mouse is no longer needed, you can disable it by 
tapping the Disable button, on the Connection or Mouse page. The 
Connection is not set up message will then be displayed on the 
Connection page. 
 

 Disabling the Stowaway Travel Mouse will not automatically turn off 

the Bluetooth radio. Conversely, turning the Bluetooth radio off while the 
Stowaway BT keyboard driver is still enabled will not work. Because of the 
behavior of the Bluetooth stack, the Bluetooth radio will automatically turn 
back on after a few seconds. 
 
To re-enable the connection, tap the Connect button on the Connection 
page or tap Enable on the Mouse page. See 

 

 
Discoverable mode is the state that allows the mouse to be detected by 
the Pocket PC device. 
 
¾  To place the mouse in Discoverable mode, press the Discoverable button 

underneath the mouse. A green LED will light underneath the mouse to 
indicate it is Discoverable. 

 
 

 
The Pocket PC and the Stowaway Travel Mouse share a virtual cable. This 
means there is a 1:1 relationship between the Pocket PC device and the 
mouse. During connection, the Pocket PC device searches the Bluetooth 
radio band until it finds the mouse. Once completed, each time the Pocket 
PC device and mouse are powered on within range of each other, the devices 
will be reconnected with a simple mouse click. Once connected, the mouse 
leaves Discoverable mode, and will not be detected by other devices. The 
Pocket PC device on the other hand will retain the ability to create new 
pairings with other devices, such as a Bluetooth keyboard.