SMART Technologies 600i3 User Manual

 

CHAPTER 8 – REPLACING YOUR UF55/UF55W PROJECTOR LAMP

Replacing the Projector Lamp Module

After you remove the lamp from the boom, follow these instructions to replace 
the lamp.

1. Wait at least 30 minutes for the projector to completely cool down.

2. Pull up the outer lamp cover with your finger.

3. Remove the outer lamp cover and keep it in a safe place.

4. Loosen the two screws on the inner lamp module with a Phillips No. 2 screwdriver.

The screws remain captive with the lamp module.