Sony Ericsson GC79 User Manual
Create a Wireless LAN Connection
19
Note:
You do not need to select the Key format or the Key length before typing the network key.
These settings automatically change to the appropriate setting as you type the network key
value. However, the key value you enter must be the correct length.
These settings automatically change to the appropriate setting as you type the network key
value. However, the key value you enter must be the correct length.
14. Click OK. The network name and icon appear at the top of the Preferred networks list.
15. Click Refresh to activate the network connection (wait up to one minute for the network connection
to be made). Your computer is connected to the selected network when you see
next to the
network name.
WLAN Connections Using LEAP
To create a connection to a wireless LAN access point using LEAP:
1. Click on the Wireless Configuration Utility LEAP tab.
2. Check the Enable LEAP tick box.
3. Click Add. The LEAP Network Properties dialog opens, enter the LEAP network details
and click OK.
4. Click Apply.
Under Windows XP // Windows Zero Config, the following points should be noted to get LEAP
working:
working:
Configure CCX/LEAP support using the control panel (when WZC is managing the network)
execute the following steps:
execute the following steps:
In the Sony Ericsson Wireless Configuration Utility (Right-click the W icon in the status tray
and select Open Utility):
and select Open Utility):
1. Add the network to the LEAP configuration page with appropriate username and password.