Epson PowerLite 700 User Manual

Before using the projector, read these instructions and the safety instructions in the 
User’s Guide on your projector CD-ROM.

If you’re using a computer, shut it down first, while you can still

see the display.

Press the

power button on the projector or remote control.

When you see the confirmation message, press the

power

button again. The projector beeps twice and the

power light

turns orange.

  With Epson’s Instant Off

®

technology, there’s no cool-down period. When

you’re done, just unplug the projector and it’s ready to travel.

 Follow these instructions to connect the projector to your video

equipment using an HDMI cable or component video cable and adapter.

For instructions on using other connection options, or connecting to a

computer, see the User’s Guide on your CD-ROM.

 For the best image and sound quality, connect your video equipment to the

HDMI port, if possible.

Connect an HDMI cable (not included) to the HDMI port on your

video player and the

HDMI port on the projector.

Start your video or presentation. Use the

Source Search button on

the projector or the

Search button on the remote control to select

the HDMI source, if necessary.

 If your video equipment has component video connectors (three

connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can use a component

video cable (not included) along with the included component-to-VGA

adapter.

Connect your component video cable to your video device.

Connect the component-to-VGA adapter that came with your

projector to the component video cable.

Connect the VGA end of the adapter to the projector’s

(Component Video) port.

You can connect an optional audio cable if you want to play sound

through the projector. See the User’s Guide on your CD-ROM for

instructions.

Start your video or presentation. Use the

Source Search button on

the projector or the

Search button on the remote control to select

the video source, if necessary.

Remove the battery cover.

Insert the batteries.

Replace the battery cover.

Open the

A/V Mute slide (lens cover).

Connect the power cord to the projector and plug

the other end into an electrical outlet.

 

The   power light on the projector turns orange.

Connect your video source, as described to the right.

Turn on your computer or video source.

Press the

power button on the projector or remote control. The

projector beeps, the

power light flashes green, and the projector

warms up. When the

power light stays green, the projector is

ready for use.

Turn over

 You should have the following items:

  Canada only: For French speakers, remove sticker(s) from the interface 

label backing sheet and place over corresponding text on the control 
panel. 

 The easiest way to set up your projector is to place it on a table in front of

your screen or wall, or on a high shelf behind you. See the User’s Guide for

other ways of setting up the projector.

 The distance between the projector and the screen generally determines the

size of the image, but the size can also vary depending on the aspect ratio

(image shape), how you zoom into the image, and whether you’ve adjusted

other image settings. Depending on the image settings you’ve chosen, you

can place the projector anywhere from 33 to 407 inches (84 to 1035 cm)

from the screen.

 Use the tables in the User’s Guide, or the Image Size or Projection Distance

calculator on the Multimedia Projectors page on Epson’s website to help

you determine the proper projection distance.

Projector

Power cord

User’s Guide

CD-ROM

Batteries

*411537000*

*411537000*

Component-to-VGA

adapter

Projector

remote control

Power button

Power button

Power light

Interface label stickers

(Included for Canada only)