Telular SX5P CDMA2000 User Manual

1.  Pick up the handset or Press the SPEAKERPHONE key. The SX5 is now “off-hook.”
2.  Listen for dial tone.
3.  Dial the phone number. The dialed number will be displayed. The name will also be displayed

if it is stored in the phonebook.

Correct Dialing Errors
•  To erase one digit, Press the CLR key once.
•  To erase all digits, Press and hold down the CLR key until all digits are erased.

Redial the Last Telephone Number Dialed
1.  Pick up the handset or Press the SPEAKERPHONE key. The SX5 is now “off-hook.”
2.  Press the REDIAL key.

When there is an incoming call, the SX5 rings, an incoming call notification displays the call type
and Caller ID information (if available), and the LED blinks.
1.  Pick up the handset or press the SPEAKERPHONE key. Press CLR to send the call directly

to voicemail.

2.  Begin talking.

Receive a Call When Caller ID is Activated
The Caller ID feature displays the caller’s number when the SX5 rings. If the caller’s name and
number are stored together in the SX5 phonebook, the caller’s name and number will be dis-
played. Contact your service provider to activate this feature.

NOTE: If there are missed calls (calls not answered), “MISSED CALLS” will be displayed with
the number of calls missed. See the Call Logs section of this manual for more information.

Hang up the phone by either placing the handset back onto the SX5 cradle or press the 
SPEAKERPHONE key if using the speakerphone.

Mute a Call
1.  While in a call, press the MUTE key. A notification will display in the upper right corner of the

LCD screen.

2.  Press the MUTE key again to un-mute the microphone.

Adjust Volume
1.  While in a call, press the Volume keys to raise or lower the handset/speakerphone volume.

Call Waiting
The FLASH key is used to answer call waiting and to switch between calls.  Contact your serv-
ice provider regarding the availability of the call waiting feature.

3-Way Calling
Contact your service provider regarding the availability of 3-way calling.
To perform a 3-way call:
1. Make the first call and wait until it connects.
2. After the first call is connected, dial the second number.
3. Press the FLASH key.  This connects the second call and puts the first call on hold.
4. Wait for the second call to connect.
5. After you are connected to the second call, Press FLASH, which then connects the first 
call and completes the 3-way call.

9