Alliance Laundry Systems D310IE3B User Manual

504490

5

If you have correctly sorted the items for washing, they 
should be properly sorted for drying too.

Towels, flannels, chenille, cottons, rugs, etc., shed lint. 
Corduroys, knits (including socks), permanent press, 
and synthetics attract lint.

In any kind of drying, lightweight fabrics will dry faster 
than heavyweight fabrics. If mixed loads are dried 
together (such as sheets and towels), remove the lighter 
weight fabrics when they are dry to prevent overdrying 
and wrinkling. The best method is to dry clothes which 
require the same time and temperature in the same load.

Do not overload your dryer. Bulk, not weight, 
determines the load size. If the dryer is overloaded, it 
could cause discoloration or permanent heat damage to 
the load. There should be space in the dryer for the 
clothes to tumble freely. This helps to reduce wrinkles. 
Large and small pieces together make up loads which 
will tumble well. Permanent press loads should be 
smaller to provide room for tumbling. Proper tumbling 
allows for fewer wrinkles. The following illustrations 
show the ideal loads sizes for fabrics. The average load 
will fill the cylinder one third to half full when wet.

A load can be too small. Just a few small pieces will not 
tumble properly. They will take longer to dry and they 
may be wrinkled. For small loads, add a couple of large 
towels or non lint shedding items to aid in tumbling.

Separate:

Separate:

Separate:

D322IE1A

D323IE1C