Epson professional series ii User Manual

1. The monitor’s power may not be on. Press the power button.

The power is on when the button is pressed in.

2. Make sure 

the 

power cord is fully plugged into the AC 

inlet

on the monitor’s back panel and the electrical outlet.

3. Check the operation of the electrical outlet by plugging in a

lamp or other electrical device to see if it works.

4. Contact your dealer or service representative; the monitor

needs repair.

H/V SYNC 

1. Make sure the computer is turned on.

2. Make sure the video interface cable is properly connected to

the monitor’s VGA connector and to 

the 

computer’s video

interface. If you are using the monitor’s BNC connectors,

make sure all your video interface cables are properly
connected. See “Connecting the Monitor to Your
Computer” on page 6 or “Connecting Two or More

Monitors to One Video Controller” on page 10.

3. Press INPUT SEL 

(on the monitor’s control 

panel) once to

change the monitor’s video input setting. See “Setting 

the

Type of Video Input” on page 20.

4. Make sure your computer’s video adapter is set up for use

with the monitor and that any DIP switches or jumpers in

the computer or on a display adapter card are set properly.

See your computer and /or video adapter card manual for

instructions.