Anritsu MG3641A User Manual

SECTION 9   STORAGE AND TRANSPORTATION

9-1

This section describes daily maintenance, storage, and transportation of the MG3641A/MG3642A.

9.1

Daily Servicing and Preventive Maintenance

To prevent degradation of the performance of the MG3641A/MG3642A, the MG3641A/MG3642A should be operated

correctly under the specified conditions.  Calibration and performance tests should also be performed routinely.

The regular servicing method and interval are shown in Table 9-1.

Table 9-1.  Regular Servicing

Period

Method

Soiling

Dust

Lubrication

Loose screws

* Do not use acetone or benzene; the paint finish may be damaged.

9.2

Storage Precautions

This paragraph describes the precautions to take when storing the MG3641A/MG3642A for a long time.

9.2.1

Precautions before storage

1. Wipe any dust and fingermarks off the cabinet.

2. Check the performance to confirm that the MG3641A/MG3642A operates normally.

3. The maximum and minimum storage temperature range is 60

° to −20 °C. The maximum humidity is 90 %.

4. Avoid storing it in locations where if may be exposed to direct sunlight, condensation (more than 90 %), excessive

dust, or active gases.

Wipe with damp cloth and soapy water or

cleaning solvent if proper ventilation is

prorided.* (DAIFLON)

Open cabinet and blow out dust with

compressed air, taking care to shield face from

dust or loose particles.

Retighten with recommended tool

• Before long-term storage
• When used in dusty locations
• When noticeable dust and dirt have

accumulated inside cabinet

None

When detected