Anritsu MG3641A User Manual

SECTION 4 OPERATING INSTRUCTIONS

4-50

4.14 Error Messages

If a panel operation or device internal error occurs, the MG3641A/MG3642A displays messages in the error message

area on the multimenu display.

Error messages are given below:

Operation error: Displayed when a setting becomes invalid because of an incorrect operation.

Data out of range:

An attempt is made to set a value out of range

(e.g., to set the frequency to 10 GHz).

Invalid suffix:

A unit key not appropriate for a set parameter is pressed

(e.g., an attempt is made to set the sweep time to 1 MHz)

Execution error:

An attempt is made to execute one of the following incorrect operations:

• To start executing the sweep with an incorrect sweep parameter specified.

• To display too many digits on the display unit for the output level offset in

volts.

• To exceed the upper limit of the variance range (

±10 dB) in level continuous

mode.

Not Stored memory:

An attempt is made to recall a memory not stored.

Trigger entry overflow:

An attempt is made to register a trigger program of more than 20 steps.

Trigger entry ignored:

An attempt is made to register the trigger program when sweep is being executed

or suspended.

Hardware error:

An attempt is made to execute settings relating to an unmounted option

(e.g., to turn on pulse modulation when the pulse modulator is not mounted.)

Main Menu (1/2)

Mod

Ofs

Mem

Data out of range

Swp

Error messages