Siemens rs232 User Manual

gigam101.fm5

21.4.99

Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 

If a malfunction occurs, check the following points:

●

Both stations are powered.

●

The cable connections to the connected devices are fully in-

serted and screwed in.

●

The stations are not too far apart and are there are no large 

parts of buildings in between.

●

Registration was successful.

●

The lokalen Station operating mode is "AT commands, local" 

or "AVM/Eumax commands, local".

or:

●

The lokalen Station operating mode is "Direct connection" 

and you have set the direct connection transmission param-

eters in your communication software.

If the malfunction still occurs after checking all the above points, 

reset both Gigaset M101 Data units to the factory defaults, see 

page 19.

If the malfunction persists, call the hotline at 0180 5 333 220.

Internet: www.siemens.de/gigaset

There must be a 220/230 V AC 50 Hz power socket in the vicin-

ity.

The Gigaset M101 Data should not be installed in the immediate 

vicinity of other electronic devices, such as hi-fi systems, office 

equipment or microwave ovens, otherwise there is a risk of mu-

tual interference.

Place the Gigaset M101 Data unit on a level, non-slip surface. 

The device feet do not normally leave any unsightly marks. How-

ever, in view of the many different varnishes and polishes cur-

rently used for furniture, the possibility of marks being left can-

not be ruled out.

Radio communication between Basis and Teilnehmer is based 

on the DECT standard. The Gigaset M101 Data complies fully 

with the relevant European directives. Should you nevertheless 

experience sound or picture distortion with your satellite signal 

receiving equipment, please get in touch with your dealer to 

have it tested for shielding faults.

Depending on the ambient conditions, the maximum radio 

range between the local station and the Partnerstation is ap-

prox. 300 m outdoors and approx. 50 m indoors.