Adtran MX2800 M13 User Manual

9-4    

61200290L1-1G

Section 9, Transaction Language 1 (TL1)

MX2800 M13 Multiplexer User Manual

Output Response messages are generated in response to received commands. Output Response Messages 
have the following general format:

For the MX2800, the 

Completion Code

 field contains one of the following values:

•

Comply

 indicates a successful execution of the received command.

•

Deny

 indicates denial of the received command.

When the received command is denied, the line in the message following the 

Completion Code

 line 

contains a four letter error code. Refer to 

on page 9-17 for an indication of the possible 

MX2800 error codes.

The MX2800 specifically uses quoted line(s) in the response message of successfully executed RTRV-
ALM commands. The quoted line format is as follows:

The NTFCNCDE field contains one of the following values:

• MN  -  Minor

• MJ  -  Major

• CR - Critical

See the condition types listed in 

on page 9-12 for possible MX2800 

CONDTYPE

 codes.

The Autonomous message is sent from the NE to the OS and is not associated with any explicit input 
message. The MX2800 uses this message to exclusively report alarmed and non-alarmed events. An auton-
omous message has the following general format:

Possible values for the 

Alarm Code

 field include the following:

• *C - Critical Alarm

• ** - Major Alarm

• * - Minor Alarm

• A - Non-alarm

• Null - (blank)