Edelbrock 15005 User Manual

©2004 Edelbrock Corporation
Rev. 1/04 - RS/mc

Catalog #15005

Brochure #63-0245

PLEASE study these instructions carefully before installing your new Edelbrock Intake Manifold Gasket. If you have any
questions or problems, do not hesitate to contact our Technical Hotline at: 1-800-416-8628, from 7am-5pm, Monday-
Friday, Pacific Standard Time or via e-mail at: Edelbrock@Edelbrock.com. Please fill out and mail your warranty card.

Qty.

Description

1

Intake Manifold Gasket

• Description: This is a replacement intake manifold gasket, which is supplied in the catalog #1500 turbo kit, as well as

the intake manifold kits, #4754 & #4756.

1. Remove the intake manifold as shown in your instructions for part #1500, #4754, or #4756.
2. Clean all gasket mating surfaces. Stuff paper towels into the open intake ports before cleaning to prevent any debris from

entering the engine.

3. Re-install the intake manifold as shown in the #1500 or #4756 instructions, using the new gasket. If your vehicle was not

equipped with air injection, trim the top edge of the gasket 

(See. Fig. 1).

4. Torque all intake manifold bolts to 17 ft/lbs., following the sequence below 

(See Fig. 2).