AGFA ePhoto CL18 User Manual

Place media with the printing side up under the 
hooks in the tray.

NOTES:
• When loading thick paper, card stock, coated 

paper, transparencies, labels, envelopes or 
Japanese postcards, use the multi-purpose tray. 
See “Available Media” in the Maintenance and 
Specifications section.

• Most media has instructions recommending the 

side to be printed first.

• Do not mix different types or thickness of media in 

the media tray at one time; this may cause a media 
jam.

• Loading media exceeding the upper limit may 

cause a media jam or miss feed.

Confirm the media guides are adjusted to the media 
size, then make sure to fix the length guide unit.

Slide the media tray completely into the printer.

CAUTION:
• Be sure to hold the media tray with both hands so 

that you do not drop it. The media tray weighs 
approximately 6.4 kg (14 lbs.) when it is fully 
loaded.

Pull (1) and raise (2) the paper support so that the 
media does not drop from the output tray.

The multi-purpose tray serves as an additional tray (for  
detailed information, refer to “Available Media” in the 
Maintenance and Specifications section).

Open the tray cover (1) and pull it to expand the 
multi-purpose tray (2).

Separate the media guides to the approximate width 
of the media.

Insert media with the printing side down into the 
multi-purpose tray while adjusting the media guides 
to the media width.

Upper limit

Load media with the
printing side up.

Hook

Paper support

Media guides

Upper limit

Load media with the
printing side down.

Upper limit

Flap

Load media with the
printing side down.