AGFA ePhoto CL18 User Manual

Page of 24
Before You Start
8
■ Static Electricity Damage
To prevent static electricity damage to any of the following 
components, touch a grounded metal surface, such as the 
printer's bare metal frame prior to touching the 
component.
• Interface connectors: network, USB, parallel, and 
connector for optional paper feeder
• Connector pins on the optional paper feeder
• Electrical components, connectors inside the printer
■ Interface Cable
Always use a shielded interface cable. Use of an 
unshielded cable can result in radio interference with 
data.
■ Power Source
The voltage level of the power source must not vary more 
than ±10% from the voltage level marked on the 
nameplate (located on the rear of the printer).
Do not use an extension cord.
Do not use a line conditioner, transient suppressor or 
surge protector as it may cause a printer error.
■ Ventilation Space
The ventilation space is needed more than 20 mm (0.8") 
between the printer and a wall.
Make sure that all accessories shown below were 
provided and have not been damaged. Report damage or 
shortages to the reseller from which the printer was 
purchased. The final page includes an area for recording 
important information such as the name of reseller, serial 
number, and date of purchase.
NOTE:
• Save the original carton and packing materials for future 
shipping and transportation of the printer. They have 
been specifically designed to protect the equipment 
during shipment.
.
Accessories
Toner cartridges
(Cyan, Magenta, Yellow, 
Black)
Printer includes free 
starter toner cartridges 
that yield 2,500 pages 
(based on 5% page 
coverage per color).
 Color print cartridge
 Black print cartridge
Waste toner cartridge
Power cord
Color calibration card
Printer CD-ROM
Setup Guide (this manual)
Supplies Re-order Label
(see page 14)
Automatic duplex unit
(DP-CL18: option / 
 DP-CL22: standard)
Jam clear label (provided 
with DP-CL18 only)
Refer to page 14 in detail.
Save it carefully!
Keep this Color calibration 
card for adjusting color 
density.
xxxxxx
x
xxxxxx
x
xxxxx
xxxxx