Adam Equipment azplus 15 User Manual
© Adam Equipment Company 2007
18
6.2.1
F1 -CALIBRATION
To enter the calibration parameter, press the [Tare] key when “
F1
” is displayed.
The display will instruct you to remove any weight from the scale, “
UnloAd
”
The display will tell you to add weight to the scale: “
LoAd
” “
15
” “
kilo
”
Add the weight shown, wait for stability then press the [Tare] key.
The display will show “
SPAn
” “
PASS
” if the calibration is OK. Or it will show “
SPAn
” “
FAIL
” if
calibration could not be completed correctly.
The scale will return to the parameter menu.
6.2.2
F2 -RESOLUTION
To enter this parameter, press the [Tare] key when “
F2
” is shown.
The display will show the current resolution, either 3000 or 6000 or Dual Range.
Press the [PLU4] key to change the value.
Press [Tare] to accept the displayed value.
NOTE: Only 3000 is allowed for the AZ
plus scales.
6.2.3
F3 -CAPACITY
To enter this parameter, press the [Tare] key when “
F3
” is shown.
The display will show the current capacity in 6, 15 or 30 kilograms.
Press the [PLU4] key to change the value.
Press [Tare] to accept the displayed value.