ABC Office 6550 User Manual

Page of 9
 
2
 
Safety Rules 
 
• 
Ensure that at no time more than one person is working at the machine. 
• 
Leave the key for the safety lock with the person responsible for the cutting machine. 
• 
Power operated cutting machines must be operated only by trained and reliable personnel.  Part of 
the training is to become familiar with the operating instructions. 
• 
The operating instructions must be accessible at any time and must be strictly observed. 
• 
Do not reach into cutting area white the knife or the paper clamp  through switching operations. 
• 
Change knife and cutting stick only with the main switch in “off” position.  For other maintenance 
and repair, which requires removal of machine covers, always disconnect the plug. 
• 
Defects in or damage to cutting machines, which affect the safety, must be repaired immediately.  
Until such faults have been eliminated the cutting machine must be put out of operation. 
• 
Annual routine inspections by specially trained service technicians are recommended for all safety 
devices, particularly the electric control measures in the cutting machine.  Records should be kept 
of these safety inspections. 
• 
Transportation of knives is only allowed in specially designed wooden cases supplied by your 
local distributor.  When inserting knife into the wooden case, ensure that the sharp edge lies flush 
with the side of the case into which the holes for the securing screws have been drilled. 
• 
Important – The safety rules must be strictly observed.  Please make sure that you are 
familiar with the operation of the paper cutter.
 
 
Installation